Forklift Training Program BC

Forklift Training Program BC - Lift trucks are sometimes referred to as jitneys, hi los or lift trucks. These powered industrial trucks are used widely nowadays. Department stores utilized forklifts to be able to unload products from trailers. Warehouses use them for tiering merchandise. And grocery stores use small models to drop supplies in the aisles. Whether loading material at a construction site or transporting lumber at a sawmill, forklift operators are needed to be trained well and certified. The main concern should be on pedestrian and worker safety. This lift truck training course teaches the safety and health regulations governing forklifts in order to ensure their safe and efficient utilization.

Forklift Training Program Safety Tips:

Forklift training programs are meant to ensure that the operator could safely control the forklift during tilting, traveling and lifting. Just qualified operators should operate a forklift.

When the forklift is in operation; arms, hands, head, feet and legs must be kept in the forklift. Forklift forks must be kept low to the ground while being slightly tilted back. Observe posted traffic signs. Sound the horn and decrease speed when taking a corner. If the vision of the driver is blocked by the load, drive in reverse slowly. Pre-check the ground for possible hazards, such as objects, oily or wet spots, rough patches, holes, vehicles and people. Prevent stopping immediately.

When a vehicle or a person crosses the lift truck's blind spot, stop the truck, lower the load, and do not continue until the path is clear. If traveling on an incline, the forks should be pointed uphill with a load and downhill without a load. The lift truck should only be turned around if on level ground.

Safety tips when steering - Never turn the steering wheel sharply when traveling fast. Turn making use of the rear wheels and support the load by the front wheels. A truck which is overloaded would be hard to steer. Follow load limitations. Never add a counterweight in order to improve steering.

Safety guidelines while loading - The forklift's recommended load capacities must be followed; the information could be found on the data plate. Always make sure that the load is positioned based on the suggested load centre. The forklift would remain steady so long as the load is kept close to the front wheels.

The forklift mast must be in an upright position prior to inserting the fork into a pallet. Before inserting the fork, level it.

Click to Download the pdf